Pink Saturday: Bow-tie Hair Clip

Hello and happy Saturday! This week is my first official week on the Pink Saturday blog (even though I totally missed the deadline by 12 hours, she was fabulous enough to let me in anyway).  I've decided to write a tutorial for all you lovelies.  Be sure to visit her blog and check out all the Pink Saturday bonanza!


I've seen lots of tutorials out there for making bow-tie hair clips out of ribbon, but I have this fabric leftover from a previous project that I was dying to use.  So this is a tutorial on how to make a bow-tie hair clip from a strip of fabric.

Fabric Bow-tie Hair Clip

Time: 15 min.
Supplies: 

• 1/4" fusible webbing
• Measuring tape/ruler/etc.
• 7"x1.5" strip of your favorite fabric
• Hair Clip
• Glue gun
• Iron

Cost: Free for me, I had it all on hand.  But if you want to be picky:

• Fusible webbing - $1
• Hair clip - $2 for 6
• I'm gonna go ahead and assume you have the rest.  Probably because I have no idea how much a tiny strip of fabric would even cost, lol.

1. Gather your supplies.  Here is a photo of the fusible interfacing I used.

2. Measure your fabric, and cut to make it 1.5" wide by 6" long.  I know, I said 7" in the supplies list, just cut it off. You will need it later.

3.  Cut a piece of fusible webbing long enough to run the length of your fabric scrap.  Fold it over and iron according to the instructions on the webbing package.

Now your strip should be 1" wide.

6. Using your ruler/tape measure as a guide, fold the right side to the middle, or the 3" mark. 

7. Fold the left side to the 3" mark. 

For this next part, I kept it all in place with the clip for photo purposes. The clip isn't really supposed to be there until the end. I'll let you know when it's for real.

8. Fold the bow in half, with the layered side facing outward.

9. Fold each side of the "sandwich" back by half, like below.

This is what it will look like if folded correctly. Now put that aside for a moment.

10. Use the cut off end of your fabric to create the "pincher" for the bow-tie.  It should be 1" long and 1.5" wide.  

11.  Lay a length of fusible interfacing along the middle, fold in, and iron.

12. Wrap this piece around the bow and loop it through the hair clip (for reals this time! Use the hair clip!).  Hot glue it in place.

You're done! Here it is on my head (for scale).

And it even matched my shirt! I swear, I did not plan this.

I got the inspiration for this project from Hip Girl Boutique LLC, who did it with ribbon.

I swear I am going to get the best use out of that ratty old handkerchief I possibly can! LOL.